中文      ENGLISH   
Home > ProductsProducts
Guard track rail forming machine line
Guard track rail forming machine line Guard track rail forming machine line

Profile:
●The thickness of sheet: 1mm---2.5mm metal iron or galvanize steel.
●Base on customer drawing, this one machine can produce four different profiles
●Change profile is depend on change cutting blade and adjust the ring of the machine
Punching profile: base on customer drawing

The structure of equipment
 1, decoiler
●Single unrolling machine, one side can put material
●Adopt motorized type
●Coil weight (Max):2000kg
●Coil dia (Max):1300mm
●Coil Width (Max.):300mm
●Power: 3KW

2, leveling
1: feeding the sheet to the guide roller (it is adjustable by right and left).
2: feeding roller: diameter is ¢160mm, material is 40CR steel, HRC48-52.
3: Leveling roller: upper is 3 rollers, down is 4 stations(total is 7 stations), material is 40CR steel, HRC48-52.
4: diameter of leveling roller: 80mm
5: leveling power: 4KW

3, servo feeding:
Function: Feeding
Structural features: servo motor drive. Multi-stage feed: Enter 10 sets of feed length. LCD touch display was easy to change, to set the technical parameters. Automatic sensing system and press Start linkage (control press start).
Power: 4KW

4, punching machine
●using punching machine for get high speed
●working pressure: 63T
●working speed:60times/min
●punching mould material: Cr12 HRC55-58°

5: roll forming
●main motor power: 18.5kw
●station: adopt cast iron HT50
●Decelerating motor: BWD14-43-18.5KW, made in Shanghai or Changzhou
●drive: by gear
●main shaft dia: ¢65mm   material: 45﹟forge steel
●roller material: GCR15 quenched 58°-62°,chromed
●roll station:18stations
●roller thickness: 2-3.5mm
●Timing by transducer:5m--8m/min(including punching)
●Transducer: Panasonic made in Japan. 380V 50HZ
●Computer: PLC, Panasonic
●Equipment structure: cast iron station
●Computer operating panel: touching screen

6: cutting
●hydraulic cutting
●knife material: Cr12,quenched 58°-62°
●oil cylinder dia:150mm
●working pressure:30mpa
●working journey: 80mm
●machine include 4 sets of cutting blades

Leveling machine:


Punching machine:

 

Products
Copyright© 2014 Zhangjiagang City Saibo Science & Technology Co.,Ltd. all resevedAbout Us |Products|Contact Us