A |
B |
C |
15 |
80 |
40 |
15 |
100 |
40 |
15 |
120 |
50 |
15 |
150 |
50 |
1 |
Coil width |
According to the final profile |
2 |
Rolling speed |
0-15m/min(not include cutting and punching time) |
3 |
Rolling thickness |
1.5-3.0mm |
4 |
Control system |
PLC (Panasonic) as list in the note |
5 |
De-coiler |
3 TON hydraulic de-coiler |
6 |
Flatten roller |
Upper us 3 rollers, down is 4 rollers |
7 |
Feeding and flatten drive power |
4kw, AC motor |
8 |
Punching and cutting mode |
Machine adopts pre-punching and pre-cutting |
9 |
Machine stand |
Iron cast structure |
10 |
Roller stations |
About 14 stations and one correction adjust system
|
11 |
Roller material |
Ccr15, chrome plated surface with hardness 58-62 degree ,CNC |
12 |
Shaft diameter |
45# forged steel, φ76mm |
13 |
Maim motor power |
18.5kw, AC motor |
14 |
Hydraulic station power |
11kw |
15 |
Hydraulic pressure |
16-20Mpa |
16 |
Post cutting system |
Machine adopt post cutting system, 4 cutters |
17 |
Material of cutting |
Cr12Mov |
18 |
Tolerance |
3m+-1.5mm |
19 |
Electric source |
380V, 50HZ,3 phase |
20 |
Way of driving |
By gear box |